電磁閥用于氣動閥門“開啟”或“關閉”的電控操作。符合NAMUR連接標準，直接安裝在氣動執行器側面，無需管子連接。根據儀表控制系統需要選擇單電控或雙電控。二位五通電磁閥配雙作用式執行器。二位三通電磁閥配單作用式執行器。同時該產品有基本型（IP67）和防爆型，防爆級別為EXD II BT4，其防爆級別適用于工廠的易爆環境場所。也可根據需要選擇合適的電壓。 OPPV551 series solenoid valves for pneumatic valves "open" or "turn off" the electric-controlled operation. Consistent with the NAMUR standard to connect directly installed in the pneumatic actuator side without the tube connection. Instrument control system in accordance with required select single or double electric control electric control. Two five pain with double acting solenoid valve actuator. 2 solenoid valve with three single-action actuators. At the same time the product has a basic type （IP67） and Explosion-proof, explosion-proof level for EXD II BT4, its explosion-proof level applicable to the factory premises explosive environment. May also select the appropriate voltage required  

技術參數》Technical parameters

結構形 Structural form	滑動Sliding
動作方式 Action mode	電磁鐵或手動操作，按下并旋轉手動操作鈕可實現手動狀態鎖定。氣動彈簧復位、機械彈簧復位、電磁鐵操作復位。 Solenoid or manual operation, press the button and rotate manual operation can achieve a state of lock manually. Reset pneumatic spring, mechanical spring reset, reset electromagnet operation.
復位方式 Reset mode	ISO228/1標準G1/4、ISO228/1  standardG1/4
接口Interface	1/4、3/8、1/2
環境溫度  Ambienttemperature	-20ºC~+80 ºC（防爆型Explosion-proof-15 ºC~+50 ºC）
介質溫度   Mediumtemperature	閥體和內部零件：陽極電鍍鋁合金、銅。加固端蓋：塑料。 Valve body and internal parts: anodized aluminum alloy, copper. Reinforcement Cover: Plastic
材質         Material quality	密封圈：丁苯橡膠（NBR）和聚亞安酯（AU）。 Ring: styrene-butadiene rubber （NBR） and polyurethane （AU）
安裝 Installation	符合NAMUR標準和VDI/VDE3845的雙孔。 Consistent with the NAMUR standards and the double VDI/VDE3845.

電氣數據》Electrical data

標準電壓 StandardVoltage	24VDC、24VAC50Hz220VAC50Hz
特殊電壓 Specialvoltage	6V~110VDC、12V~254VAC、50或Or 60Hz
電壓偏差 Voltagedeviation	±10%標準和防爆（Exd II BT4）線圈 ± 10% standard and explosion-proof （Exd II BT4） coil
功耗 Power	標準線圈：AC啟動功率6VA，穩定功率4.3VA（熱態）DC2.6W（熱態），3W（冷態） Standard coil: AC power to start 6VA, stable power 4.3VA （hot state） DC2.6W （hot state）, 3W （cold）
工作方式 Working methods	*ED（DB），連續操作。 * ED （DB）, continuous operation.
防護等級 Protection Level	IP65帶符合DIN40050的正確安裝連接器 IP65 with in line with the correct installation DIN40050 connector
電氣連接 Electrical connections	PG9連接器 Connector PG9